Tag Archives: General Grabber tyres feature Duragen

General Grabber tyres feature: Duragen

General Grabber tyres feature

General Grabber tyres feature

General Grabber tyres feature Duragen

Tyre choice is very important for off-road performance. Even the most capable 4WD platform can run into problems. Especially off-road when fitted with street-oriented tyres. As is the case with nearly all new 4×4 vehicles,. But by the same token, dedicated off-road tyres will have less traction. Especially on wet tarmac, which is considerably noisier than road tyres, there is always a compromise.

Familiarity with the features and controls of a new 4WD vehicle is key. Hence, getting the best of it when venturing off-road. As a result, plenty of drivers have come unstuck, looking at the 4×4 logo on their new car and thinking they can drive it anywhere.

General Grabber tyres feature Duragen

In particular, pay attention to how the 4WD system operates. If it requires any driver input,. Thus, such as selecting 2WD or 4WD, changing between a low or high ratio. Including manual differential locking or whether the front hubs are freewheeling, where the hub must be locked by hand.

Wheel size is also a factor; large-diameter rims with low-profile tyres look good in the city but have very little off-road capability, and off-road tyres may not be available to fit them. When possible, fitting mud-terrain (MT) or all-terrain (AT) tyres will dramatically increase the off-road ability of any new 4WD vehicle and provide the most flexibility.

By checking the vehicle manufacturer’s recommended range of tyre sizes and choosing an off-road tyre as tall and wide as possible, not only will traction be improved, but the taller tyres will also increase the ground clearance.

General Grabber tyres feature Duragen

One thing about General Tyres. Hence, they are constantly looking out for quality materials. Thus, to enhance the performance of their tyre products,. Of course, General makes a broad range of tyres. Accordingly, to fit many models of ultra-high-performance passenger, light truck, off-road, and commercial tyres.

General Tyres is now under the large Continental Tyre Group. Therefore, as part of this giant organisation,. Naturally, General Tyres has access to all of the scientific and engineering facilities. Thus belonging to the Continental Tyre  Group.

One of the latest technology materials to be used is state-of-the-art technologies such as Duragen, 3D Sipe, and the V.A.I. Visual Alignment Indicator. (a feature of tread design that allows for you to monitor even initial tyre wear shoulder to shoulder) and RTM (Replacement Tyre Monitor—a feature of tread design that allows for you to control overall tyre wear).

General Grabber tyres feature Duragen

Duragen is used to build up the tyre tread layer. Accordingly, General says that “robust compounds give excellent cut and chip resistance” and “reinforced tread blocks reduce block deformation.”.

This innovation of design gives the tyre excellent properties.

General Grabber tyres feature Duragen

That improves the life of the tread. When the tyre is subjected to harsh conditions. Therefore, that is experienced when using your vehicle in a tough terrain situation.

The Duragen features also include an ultra-high-strength steel belt. As expected, this gives the tyres an even footprint. giving the vehicle driver confidence and stability. As expected on rocky or other tough terrain.

http://www.pellontyres.co.uk/Tyre/Details/General/Grabber+AT+3